Colours

These are our standard colours. We can produce non-standard colours, please contact us for details. Black and White are also available.

These colours are approximate only, and actual colours will be different in intensity and shade. This is due to the limitations of the computer screen you are viewing and when in the pool. In the empty pool, the internal reflections will intensify the colours. When the pool is full, it will reflect the colours of the sky, turning even dark greys to a blue colour.

To gain an idea of how a colour looks in real life, click over the colour square, and it will take you to pools painted in that colour.

Fluoropolymers can be made any colour specified. You can literally go to any hardware or paint shops and provide us with the card of major paint brands and the manufacturers will match it. 

See more information at the bottom of this page.

SKY BLUE
SKY BLUE - LIGHT BLUE
BONDI BLUE MID BLUE
BONDI BLUE - MID BLUE
SAPPHIRE DARK BLUE
SAPPHIRE - DARK BLUE
HOMEBUSH BLUE colour
HOMEBUSH BLUE
Sea Foam Light green
SEA FOAM - LIGHT GREEN
WAVE GREEN MID GREEN
WAVE GREEN - MID GREEN
OCEAN FLOOR DARK GREEN
OCEAN FLOOR - DARK GREEN
WHITE
WHITE
PEARL GREY LIGHT GREY
PEARL GREY - LIGHT GREY
SQUIRREL MID GREY
SQUIRREL MID GREY
LAVA GREY - DARK GREY
LAVA GREY- DARK GREY
BLACK
BLACK
SUN KISS LIGHT BEIGE
SUN KISS - LIGHT BEIGE
WARM SAND MID BEIGE
WARM SAND - MID BEIGE
LATTE DARK BEIGE
LATTE - DARK BEIGE

Colour Selection

  • When selecting a colour for your pool, there is quite a range. However some guidelines may assist you in gaining the right colour:
  • You may like it to blend in or contrast with colours around your pool, such as a tile line, pavers, vegetation. See the Project Gallery to give you some ideas.
  • A considerable amount of “colour” comes from the sky….so white becomes blue, pale jade becomes a tropical blue etc.
  • Darker colours mean warmer water, and so can extend swimming season in the south, yet may prove too hot to cool you down when you need it most.
  • Paints that graded for swimming pools are functional coatings meaning it’s mainly designed to protect your pool shell from chemicals, water, fats etc. It does come in a range of colours however for example epoxies will chalk slowly over time and may take on a slight yellow tinge. Lighter colour is best. Fluoropolymers do not do that though and should not show any of those issues over time. 
  • Salt water pools (and some chlorine pools) will leave a white residue on the surface. This is mainly dissolved “salts” in the water, much like after you have been swimming is the sea and have a white crust on your skin. It’s not detrimental, however will show up more on darker colours. You can wipe pool surfaces to remove,  in a splash zone can be quite noticeable and thus a lighter colour should be selected.